GMC Yukon 2007-2014 6L80 Transmission Transmission Torque Specifications & Bolt Torque Values
GMC Yukon 2007-2014

GMC Yukon 2007-2014 6L80 Transmission Torque Specifications

Find the precise torque specifications for bolts on the 6L80 transmission of a 2007-2014 GMC Yukon. This page provides critical information for proper installation and repair, ensuring optimal transmission function and longevity.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Transmission mounting

This subsystem includes the bolts that secure the transmission to the engine block and transmission crossmember.

1

Transmission Mounting Bolts

M14 x 1.5
Torque Value
37 ft-lbs (50 N·m)

Transmission oil pan

This subsystem includes the bolts that secure the oil pan to the transmission case.

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Value
9 ft-lbs (12 N·m)
Important Notes
Estimated bolt size based on similar components.

Transmission fluid system

This subsystem includes the plugs and bolts that allow for the transmission fluid to be drained and filled.

1

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Value
18 ft-lbs (25 N·m)
2

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Value
18 ft-lbs (25 N·m)

Transmission bellhousing

This subsystem includes the bolts that secure the bellhousing to the transmission case and engine block.

1

6L80 Transmission Bellhousing Bolts

M14 x 1.5
Torque Value
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value based on industry standards.

Transmission valve body

This subsystem includes the bolts that secure the valve body to the transmission case.

1

6L80 Transmission Valve Body Bolts

M10 x 1.25
Torque Value
20 ft-lbs (27 N·m)
Important Notes
Estimated torque value based on industry standards.

Transmission solenoid pack

This subsystem includes the bolts that secure the solenoid pack to the transmission case.

1

6L80 Transmission Solenoid Pack Bolts

M8 x 1.25
Torque Value
10 ft-lbs (14 N·m)
Important Notes
Estimated torque value based on industry standards.

Transmission filter

This subsystem includes the bolts that secure the transmission filter to the transmission case.

1

6L80 Transmission Filter Bolts

M8 x 1.25
Torque Value
10 ft-lbs (14 N·m)
Important Notes
Estimated torque value based on industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

Why are torque specifications important for 6L80 transmission bolts?

Incorrect torque values can lead to premature failure of bolts, potentially damaging the transmission housing or other components. Over-tightening can strip threads, while under-tightening can allow bolts to loosen and vibrate, leading to leaks or damage during operation. Proper torque ensures a secure and reliable connection, maximizing transmission longevity.

Q2

How do I know if my 6L80 transmission bolts need tightening?

Visual inspection of the bolts for looseness or damage is crucial. Listen for unusual noises, such as rattling or clinking, especially during acceleration or deceleration. A transmission fluid leak can also indicate loose connections. If you suspect an issue, consult the specific torque specifications for your 2007-2014 GMC Yukon's 6L80 transmission.

Q3

What happens if I use the wrong torque wrench setting?

Incorrect torque settings can have serious consequences. Using a wrench that's too tight could strip the bolt heads, making it impossible to remove them. Using one that's too loose can lead to premature failure, potentially damaging the transmission's internal components due to vibration.

Q4

What are the potential consequences of ignoring torque specifications during transmission work?

Ignoring torque specs could result in a transmission failure, leading to significant repair costs. This could include damage to the transmission housing, leaks, and possible complete transmission replacement. In extreme cases, a catastrophic failure could cause injury to individuals working on or near the vehicle.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A calibrated torque wrench is essential for accurate bolt torque application.

  • Accurate torque readings
  • Adjustable torque settings
  • Durable construction
Learn more

Sockets and Wrenches

Various sizes of sockets and wrenches to access the transmission bolts.

  • Appropriate sizes for transmission bolt heads
  • Durable construction for repeated use
Learn more

Jack Stands

For safely supporting the vehicle during transmission work

  • Stable support for vehicle
  • Adjustable height
Learn more

Transmission Mount Support/Floor Jack

To properly support the transmission during removal and installation.

  • Maintain alignment during work
  • Prevent damage to the transmission or vehicle
Learn more
Service Procedures

6L80 Transmission Bolt Torque Sequence - 2007-2014 GMC Yukon

Detailed procedure for applying torque to all bolts in the 6L80 transmission.

  • Ensure vehicle is securely supported on jack stands.
  • Disconnect negative battery terminal.
  • Remove transmission mounting bracket.
  • Carefully remove transmission bolts, noting the original position and torque specifications.
  • Inspect bolts for damage and replace as needed.
  • Apply specified torque to each bolt using a torque wrench, following the manufacturer's torque sequence.
  • Reinstall all transmission mounting hardware.
  • Reconnect negative battery terminal.
  • Lower vehicle and perform a test drive.
View full procedure

6L80 Transmission Removal and Installation - 2007-2014 GMC Yukon

Detailed procedure for removing and installing the 6L80 transmission, including proper bolt torque and sequence.

  • Consult relevant service manuals for detailed removal steps.
  • Thoroughly document the location of all components.
  • Maintain proper alignment during transmission manipulation.
  • Use care when working with hydraulic lines.
View full procedure
Technical Service Bulletins

Potential Transmission Failure Due to Incorrect Bolt Torque Sequence

2023-03-15

Addresses potential for transmission failure due to incorrect torque sequence on 6L80 transmission bolts.

2007-2014 GMC Yukon

Resolution: Consult the updated service manual for the correct torque sequence when installing the transmission.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 GMC Specs. All rights reserved.

Privacy Policy Terms of Service