GMC Jimmy 1995-2001 Body Specifications
Explore the detailed body specifications for the 1995-2001 GMC Jimmy, including dimensions, materials, and design features. This guide is essential for mechanics, restorers, and enthusiasts seeking accurate information for repairs, maintenance, and upgrades.
Overview Specifications
This document provides detailed specifications and technical information about the body of the 1995-2001 GMC Jimmy. It is designed to help users understand the vehicle's body structure, dimensions, and features. Use the search functionality to find specific terms or navigate through sections to explore detailed information about the Jimmy's body design and components.
How to Use
Use the search bar to enter keywords related to the body specifications, such as 'dimensions' or 'materials'. Results will highlight relevant sections and subsections.
Scroll through the document or use the table of contents to jump to specific sections. Each section is organized into subsections with detailed technical points.
Key Specifications
Overall Length
183.9 inches
Wheelbase
107 inches
Curb Weight
3,800-4,200 lbs
Cargo Capacity
74.5 cubic feet
Ground Clearance
8.1-8.5 inches
Available Specifications
Exterior Dimensions
This section covers the exterior measurements of the 1995-2001 GMC Jimmy, including overall length, width, height, and wheelbase. These dimensions are essential for understanding the vehicle's size and proportions.
Exterior Dimensions
This section covers the exterior measurements of the 1995-2001 GMC Jimmy, including overall length, width, height, and wheelbase. These dimensions are essential for understanding the vehicle's size and proportions.
Overall Dimensions
- Overall length: 183.9 inches
- Overall width: 68.5 inches
- Overall height: 66.5 inches (2WD), 67.5 inches (4WD)
- Wheelbase: 107 inches
- Ground clearance: 8.1 inches (2WD), 8.5 inches (4WD)
- Curb weight: 3,800-4,200 lbs (depending on configuration)
Cargo Area Dimensions
- Cargo area length: 54.5 inches
- Cargo area width: 50.5 inches
- Cargo area height: 36.5 inches
- Maximum cargo capacity: 74.5 cubic feet
Body Structure
This section details the construction and materials used in the GMC Jimmy's body, including its frame, panels, and structural components. It highlights the vehicle's durability and design features.
Body Structure
This section details the construction and materials used in the GMC Jimmy's body, including its frame, panels, and structural components. It highlights the vehicle's durability and design features.
Frame and Chassis
- Body-on-frame construction
- Steel ladder frame for durability
- Reinforced crossmembers for added strength
- Galvanized steel panels for corrosion resistance
Exterior Panels
- Fiberglass rear tailgate
- Steel hood and fenders
- Plastic front grille and bumpers
- Optional chrome accents and trim
Exterior Features
This section outlines the exterior features and design elements of the GMC Jimmy, including lighting, mirrors, and optional accessories.
Exterior Features
This section outlines the exterior features and design elements of the GMC Jimmy, including lighting, mirrors, and optional accessories.
Lighting
- Halogen headlights with integrated turn signals
- Rear combination lamps with brake and reverse lights
- Optional fog lights for improved visibility
- Roof-mounted cargo light
Mirrors and Glass
- Manually adjustable side mirrors
- Optional power-adjustable mirrors
- Tinted rear window glass
- Rear window defroster
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- SUV
- Configuration
- 4-door
- Platform
- GMT330
- Material
- Steel unibody with reinforced frame
- Location
- Manufactured in Shreveport, Louisiana
Dimensions
- Length
- 184.3 in (4681 mm)
- Width
- 68.5 in (1740 mm)
- Height
- 66.5 in (1689 mm)
- Wheelbase
- 107 in (2718 mm)
- Ground Clearance
- 7.9 in (201 mm)
- Curb Weight
- 3980 lbs (1805 kg)
- Cargo Volume
- 36.7 cu ft (1039 L)
Materials
- Body Panels
- Galvanized steel
- Frame
- High-strength steel
- Roof
- Steel with optional fiberglass
- Windows
- Tempered glass
- Bumpers
- Reinforced plastic with steel supports
Features
- Exterior
-
- Removable rear roof panel (optional)
- Integrated roof rack
- Chrome grille
- Fog lights
- Rear spoiler
- interior
-
- Cloth or leather seating
- Foldable rear seats
- Center console with storage
- Power windows
- Tilt steering wheel
- Lighting
-
- Halogen headlights
- Rear fog lights
- Third brake light
- Interior dome light
- Storage
-
- Under-seat storage
- Glove compartment
- Door pockets
- Rear cargo tie-downs
- Aerodynamics
-
- Streamlined body design
- Wind-deflecting roof rack
- Rear spoiler for stability
Safety Features
- Structural
-
- Reinforced steel frame
- Side-impact door beams
- Crush zones
- Restraint Systems
-
- Driver and passenger airbags
- 3-point seatbelts
- Child safety seat anchors
- Visibility
-
- Large side mirrors
- Rear defogger
- High-mounted brake light
Comfort Features
- Climate Control
-
- Air conditioning
- Rear defroster
- Dual-zone climate control (optional)
- Seating
-
- Adjustable driver seat
- Heated front seats (optional)
- Fold-flat rear seats
- Noise Reduction
-
- Insulated cabin
- Acoustic windshield
- Sealed body panels
- Convenience
-
- Power door locks
- Remote keyless entry
- Cruise control
Accessories
- Exterior
-
- Roof rack crossbars
- Running boards
- Trailer hitch
- interior
-
- Cargo organizer
- Floor mats
- Sunshade
- Protection
-
- Mud flaps
- Bug deflector
- Window deflectors
Maintenance
- Service interval
- Every 7,500 miles or 6 months
- Service Items
-
- Inspect body panels for rust
- Check door seals and weatherstripping
- Lubricate hinges and latches
- Inspect roof panel seals (if applicable)
- Clean and wax exterior
- Maintenance Notes
- Regularly inspect for corrosion, especially in winter climates.
Warranty
- Basic
- Miles: 36,000Years: 3Coverage: Bumper-to-bumper
- Powertrain
- Miles: 60,000Years: 5Coverage: Engine, transmission, drivetrain
- Corrosion
- Miles: 100,000Years: 6Coverage: Perforation only
- Roadside Assistance
- Miles: 36,000Years: 3Coverage: 24/7 towing and emergency services
Production Details
- Manufacturer
- General Motors
- Manufacturing Process
-
- Robotic welding
- Electro-coating for rust protection
- Precision assembly
- Quality Control
- inspection Stages: Pre-assembly component checks, Post-assembly alignment tests, Final paint and finish inspectionTesting: Wind tunnel testing, Crash testing, Water leakage testing
- Sustainability Practices
-
- Recycled steel usage
- Low-VOC paints
- Energy-efficient manufacturing
- Production Metrics
- Annual Output: Approximately 50,000 unitsProduction Time: 18 hours per vehicle
Service Information for body Service
Maintenance and service requirements specific to the body
- Inspect body panels for damage or rust
- Check door and window seals
- Lubricate hinges and latches
- Clean and wax exterior surfaces
- Inspect roof panel seals (if applicable)
Pay special attention to areas prone to corrosion.
- Reapply rust protection if needed
- Inspect and tighten roof rack mounts
- Check alignment of body panels
- Inspect undercarriage for damage
- Test all exterior lights
Use manufacturer-recommended rust inhibitors.
- Perform thorough rust inspection
- Replace worn weatherstripping
- Inspect and repair paint chips
- Check and adjust door alignment
- Inspect and clean drainage channels
Address any rust spots immediately to prevent spread.
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the engine specifications for the 1995-2001 GMC Jimmy?
What are the engine specifications for the 1995-2001 GMC Jimmy?
The 1995-2001 GMC Jimmy is equipped with either a 4.3L V6 engine or a 2.2L I4 engine, depending on the model year and trim. The V6 engine produces 190-200 horsepower and 250-260 lb-ft of torque, while the I4 engine delivers 120-130 horsepower and 140-150 lb-ft of torque. Both engines are compatible with either a 4-speed automatic or a 5-speed manual transmission. The Jimmy also features a 4WD system for off-road capability.
Q2 What is the recommended maintenance schedule for the GMC Jimmy?
What is the recommended maintenance schedule for the GMC Jimmy?
The GMC Jimmy requires regular maintenance to ensure optimal performance. Oil changes are recommended every 3,000-5,000 miles, while the air filter should be replaced every 15,000-30,000 miles. Inspect the brakes and tires every 10,000 miles, and replace the spark plugs every 30,000-50,000 miles. The coolant and transmission fluid should be flushed every 50,000 miles. Always refer to the owner's manual for specific maintenance intervals.
Q3 How do I replace the alternator in a 1995-2001 GMC Jimmy?
How do I replace the alternator in a 1995-2001 GMC Jimmy?
To replace the alternator, first disconnect the negative battery cable. Remove the serpentine belt using a wrench to release tension. Disconnect the electrical connectors and mounting bolts from the alternator. Install the new alternator by reversing the steps, ensuring all bolts are tightened to the manufacturer's specifications. Reconnect the battery and test the alternator to confirm proper operation.
Q4 Why is my GMC Jimmy's check engine light on?
Why is my GMC Jimmy's check engine light on?
The check engine light can indicate various issues, such as a faulty oxygen sensor, loose gas cap, or malfunctioning catalytic converter. Use an OBD-II scanner to retrieve diagnostic trouble codes (DTCs) from the vehicle's computer. Common codes for the Jimmy include P0171 (system too lean) and P0420 (catalyst efficiency below threshold). Address the specific issue based on the code and clear the light after repairs.
Q5 How can I improve the fuel efficiency of my GMC Jimmy?
How can I improve the fuel efficiency of my GMC Jimmy?
To optimize fuel efficiency, ensure proper tire inflation, use the recommended grade of motor oil, and replace clogged air filters. Avoid excessive idling and aggressive driving. Regularly service the fuel system and maintain the engine's timing and ignition systems. Upgrading to low-rolling-resistance tires and reducing vehicle weight can also improve mileage.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
1995-2001 GMC Jimmy Service Manual
Coming SoonComprehensive guide covering maintenance, repairs, and troubleshooting for the 1995-2001 GMC Jimmy.
Technical Service Bulletin: Transmission Shifting Issues
Coming SoonAddresses common transmission shifting problems and provides repair instructions for the 1995-2001 GMC Jimmy.
GMC Jimmy Parts and Accessories Catalog
Coming SoonDetailed catalog of OEM and aftermarket parts, including compatibility information for the 1995-2001 GMC Jimmy.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.